Airport Frequency Page - Garmin GPS 400W Pilot's Manual & Reference

400w series
Hide thumbs Also See for GPS 400W:
Table of Contents

Advertisement

6 - WPT PAGES
Airport Frequencies
The following descriptions and abbreviations are
used on the airport runway page:
Airport Identifier,
Symbol and Type
Frequency Type
Usage Restrictions
Information
in WPT group
• Type—
Usage type: Public, Military, Heli-
port, or Private
• Surface— Runway surface types include: Hard,
Turf, Sealed, Gravel, Dirt, Soft,
Unknown or Water
• Lighting— Runway lighting types include:
No Lights, Part Time, Full Time,
Unknown or Frequency (for pilot-
controlled lighting)
Airport Runway Page Options
Select Next FPL Apt?
As described earlier in this section.
Select Destination Apt?
As described earlier in this section.
118
Scroll Bar
Frequency
Third Page
190-00356-00 Rev B

Airport Frequency Page

The airport frequency page displays radio frequen-
cies and frequency types for the selected airport, as
well as sector and altitude restrictions (where appli-
cable). If the selected airport has a localizer-based
approach, the localizer frequency(s) is also listed on
the airport frequency page. The airport frequency page
may be used to quickly select and tune a COM or
VLOC frequency.
To scroll through the frequency list and tune to a
desired frequency on the list:
Press the small right knob to actvate the
1.
cursor.
2.
Turn the large right knob to scroll through the
lst, placng the cursor on the desred frequency.
If there are more frequences n the lst than can
be dsplayed on the screen, a scroll bar along
the rght-hand sde of the screen wll ndcate
where you are wthn the lst.
Press ENT to place the selected frequency
3.
n the standby feld of the COM or VLOC
wndow.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gnc 420awGnc 420wGns 430awGns 430w

Table of Contents