This same process may also be used to remove
individual waypoints from the active flight plan.
To remove a waypoint using the CLR key:
1.
Wth the actve flght plan page dsplayed, press
the small right knob to actvate the cursor.
Turn the large right knob to hghlght the
2.
dentfier for the waypont you wsh to delete.
Identfiers wll appear n green text.
3.
Press CLR to dsplay a confirmaton wndow.
4.
Wth "Yes?" hghlghted, press ENT to remove
the selected procedure.
The "Activate Leg?" provides a shortcut that allows
you to specify which leg of the flight plan will cur-
rently be used for navigation guidance, using the
direct-to key.
To activate a specific leg of the active flight plan:
1.
Press the small right knob to actvate the
cursor and turn the large right knob to hgh-
lght the desred destnaton waypont.
2.
Press direct-to twce to dsplay an "Actvate
Leg" confirmaton wndow.
3.
Wth "Actvate?" hghlghted, press ENT.
When using instrument procedures, this feature
can be used not only to activate a specific point-to-
point leg, but to also activate the procedure turn
portion of an approach, follow a DME arc or activate a
holding pattern.
Any approach, departure or arrival can be reviewed
on the appropriate airport page in the Waypoint page
group.
To review a procedure while viewing a flight plan
page:
1.
Wth a flght plan page dsplayed, press the
small right knob to actvate the cursor.
Turn the large right knob to hghlght the
2.
procedure header and press ENT to select the
WPT page group.
190-00356-00 Rev B
4 - FLIGHT PLANS
Active Flight Plan Shortcuts
79