Scheduler - Garmin GPS 400W Pilot's Manual & Reference

Scheduler

To enter a scheduled message:
1. Select "Scheduler" from the flght plannng
page.
2. The flashng cursor hghlghts the first message
field. If necessary, turn the large right knob
to hghlght the first blank message field.
3. Use the small and large right knobs to enter
the message text. Press ENT when finshed.
(The 400W-seres unt wll store up to nne
scheduled messages holdng 20 characters
each.)
4. The flashng cursor moves to the type field
under the new message. Turn the small right
knob to dsplay a wndow of avalable optons:
(Event, One Tme, Perodc). Press ENT to
select.
5. The flashng cursor moves to the tme/date
field. Use the small and large right knobs to
set the tme or date requred before the mes-
sage s dsplayed. Tme s entered as hours/mn-
utes (hhh:mm). Event-based messages expre
at a specfic date and tme. Press ENT, when
finshed.
To edit a scheduled message:
1. Select "Scheduler" from the flght plannng
page.
2. The flashng cursor hghlghts the first message
field.
To edt the message text, turn the large right
3.
knob to hghlght the desred message field. Use
the small and large right knobs to edt the
message text—enterng the new text drectly over
the old message. Press ENT when finshed.
To edt the tme field, turn the large right
4.
knob to hghlght the field. Use the small
and large right knobs to edt the new date
or tme—enterng the new value drectly over
the old figure. Press ENT when finshed.
To delete a scheduled message:
1. Select "Scheduler" from the flght plannng
page.
2. The flashng cursor hghlghts the first message
field. Turn the large right knob to hghlght
the desred message field.
3. Press CLR to delete the message text, followed
by ENT to confirm the deleton.
190-00356-00 Rev B
9 - AUX PAGES
Flight Planning
157