FlGht TMers - Garmin GPS 400W Pilot's Manual & Reference

400w series
Hide thumbs Also See for GPS 400W:
Table of Contents

Advertisement

Flight Timers
To view, use or reset the generic timer:
1.
Select "Flght Tmers" from the utlty page.
2.
The flashng cursor hghlghts "Start?". To start
the generc tmer, press ENT. (You wll typcally
begn wth ths step for count up tmers. How-
ever, for count down tmers, you may wsh to
enter a count drecton and tme before startng
the tmer. )
3.
To change the count drecton, turn the large
right knob to hghlght count drecton field:
"Down" or "Up". Turn the small right knob
to select the desred count drecton. Press ENT
when finshed.
4.
For a count down tmer, turn the large right
knob to hghlght the tme field. Use the small
and large right knobs to enter the count
down tme—n hours, mnutes and seconds.
Press ENT when finshed.
5.
To stop the generc tmer, turn the large right
knob to hghlght "Stop?" and press ENT.
To reset the generc tmer, turn the large right
6.
knob to hghlght the tme field. Press CLR,
followed by ENT.
To record or reset the departure time:
1.
Select "Flght Tmers" from the utlty page.
Turn the large right knob to hghlght the
2.
reset mode field, under "Departure Tme".
(The reset mode field wll ndcate "Pwr-on"
or "GS>30kt".)
Turn the small right knob to select the desred
3.
reset mode. ("Pwr-on" wll record a departure
tme when the 400W-seres unt s turned on.
"GS>30kt" wll record a departure tme once
the GPS-computed ground speed exceeds 30
knots.)
Press ENT when finshed.
4.
To reset the departure tme, turn the large
5.
right knob to hghlght "Reset?" and press
ENT.
To view, use or reset total trip time:
1.
Select "Flght Tmers" from the utlty page.
Turn the large right knob to hghlght the
2.
reset mode feld, under "Total Trp Tme".
(The reset mode field wll ndcate "Pwr-on"
or "GS>30kt".)
Turn the small right knob to select the desred
3.
reset mode. ("Pwr-on" wll record trp tme, n
hours/mnutes/seconds, any tme the 400W-
seres unt s turned on. "GS>30kt" wll record
trp tme any tme the GPS-computed ground
speed exceeds 30 knots.)
4.
Press ENT when finshed.
190-00356-00 Rev B
9 - AUX PAGES
Utility Page
161

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gnc 420awGnc 420wGns 430awGns 430w

Table of Contents