Garmin GPS 400W Pilot's Manual & Reference page 162

9 - AUX PAGES
Flight Planning
3b. For flght plan fuel plannng, turn the small
right knob to select the desred flght plan by
number (already stored n memory. "00" s the
actve flght plan). Turn the large right knob
to hghlght the "LEG" field and turn the small
right knob to select the desred leg of the flght
plan, or select "Cum" to apply fuel plannng
calculatons to the entre flght plan.
4. If your fuel management system does not enter
the data automatcally, turn the large right
knob to hghlght the fuel on board (FOB)
field.
5. Use the small and large right knobs to enter
the amount of fuel on board. Press ENT when
finshed.
6. The flashng cursor moves to the fuel flow (FF)
field. Use the small and large right knobs
to enter the fuel flow rate. Press ENT when
finshed. Note that f a fuel system s provdng
current fuel flow, the fuel flow field wll default
to ths value.
152
7. The flashng cursor moves to the ground speed
(GS) field. Use the small and large right
knobs to enter the ground speed. Press ENT
when finshed.
8. Wth all varables entered, the followng nfor-
maton wll be provded:
• REQ — Quantity of fuel required
• LFOB — Left-over fuel on board
• LRES — Left-over fuel reserve time
• EFF — Efficiency, expressed in distance per
fuel units (e.g. nautical miles per
gallon)
• RNG — Range (distance)
• ENDUR — Flight endurance, or total available
To reconfigure the data fields press MENU to
9.
dsplay the optons wndow. Turn the small
right knob to hghlght the "change fields?"
opton. Press ENT to reconfigure the data
fields. Turn the large right knob to select the
desred field. Turn the small right knob to
hghlght the desred data. Press ENT to select
the data configuraton.
190-00356-00 Rev B
flight time