DensTy Alt / Tas / WNds - Garmin GPS 400W Pilot's Manual & Reference

9 - AUX PAGES
Flight Planning
4. Turn the large right knob to hghlght the
departure tme (DEP TIME) field.
Use the small and large right knobs to enter
5.
the departure tme. Press ENT when finshed.
(Departure tme may be entered n local or UTC
tme, dependng upon unt settngs.)
6. The flashng cursor moves to the ground speed
(GS) field. Use the small and large right
knobs to enter the ground speed. Press ENT
when finshed.
7. Wth all varables entered, the followng nfor-
maton wll be provded:
• DTK— Desired track, or desired course
• DIS— Distance
• ETE— Estimated time en route
• ESA— En route safe altitude
• ETA— Estimated time of arrival
154
Density Alt / TAS / Winds
To calculate density altitude, true airspeed, winds
aloft:
1. Select "Densty Alt / TAS / Wnds" from the
flght plannng page.
2. The flashng cursor hghlghts the ndcated alt-
tude (IND ALT) field. Use the small and large
right knobs to enter the alttude ndcated on
your altmeter. Press ENT when finshed.
3. The flashng cursor moves to the calbrated
arspeed (CAS) field. Use the small and large
right knobs to enter the arspeed from your
arspeed ndcator. Press ENT when finshed.
4. The flashng cursor moves to the barometrc
settng (BARO) field. Use the small and large
right knobs to enter the barometrc settng
(altmeter settng). Press ENT when finshed.
5. The flashng cursor moves to the total ar tem-
perature (TAT) field. Use the small and large
right knobs to enter the temperature. Press
ENT when finshed.
190-00356-00 Rev B