RestorNg Factory SettNgs; Dual UnT ConsDeratOns; Map Page - Garmin GPS 400W Pilot's Manual & Reference

2 - NAV PAGES
Map Page
Restoring Factory Settings
You can also quickly return all data field settings to
their original factory settings.
To restore all six data fields to factory default
settings:
1. Startng wth the default NAV page, press the
MENU key to dsplay an optons menu.
Turn the large right knob to hghlght the
2.
"Restore Defaults?" opton and press ENT.
Dual Unit Considerations
A "Crossfill?" option is provided from the Default
NAV Page. This option allows you to transfer a direct-
to destination, the active flight plan, any stored flight
plan or user waypoints to a second 400W or 500W-
series Garmin unit.
Some crossfill operations can be done automati-
cally. If the crossfill method in both 400W (or 500W)-
series units is set to "auto", a change in the direct-to
destination or active flight plan on one unit can also be
seen on the other. See Section 4 - Flight Plans - Flight
Plan Catalog Options for additional details on using
the "Crossfill?" option.
NOTE: The databases of the 400/500 series and
the 400W/500W are incompatible so you may not
mix systems.
32

Map Page

The second NAV page is the map page, which dis-
plays your present position using an airplane symbol,
along with nearby airports, navaids, user-defined
waypoints, airspace boundaries, lakes, rivers, high-
ways and cities.
NOTE: The electronic chart is an aid to navigation
and is designed to facilitate the use of authorized
government charts, not replace them. Land and
water data is provided only as a general reference
to your surroundings. The positional accuracy
of the land and water data is not of a precision
suitable for use in navigation and it should not
be used for navigation. Only official government
charts and notices contain all information needed
for safe navigation – and, as always, the user is
responsible for their prudent use.
Map Range
NOTE: If the 400W-series unit is unable to
determine a GPS position, the present position
(airplane) symbol will appear on the Map Page in
yellow. No symbol will be present when there is
no active flight plan.
190-00356-00 Rev B
Map Display
Data
Fields
Present
Position
Page location
in NAV group