Selecting A Destination From The Active Flight Plan; Selecting The Nearest Airport As A Direct-To Destination - Garmin GPS 400W Pilot's Manual & Reference

Selecting a Destination from the Active Flight
Plan
If you're navigating an active flight plan, any
waypoint contained in the flight plan may be selected
as a direct-to destination from the select direct-to
waypoint page. (see Section 4 - Flight Plans, for more
information on flight plans.)
To select a direct-to destination from the active
flight plan:
1. Press the direct-to key. The select drect-to
waypont page wll appear, wth the waypont
dentfier field hghlghted.
2. Turn the large right knob to hghlght the
flght plan (FPL) field.
3. Turn the small right knob to dsplay a wndow
showng all wayponts n the actve flght
plan.
Contnue turnng the small right knob to
4.
scroll through the lst and hghlght the desred
waypont.
5. Press ENT to confirm the selected waypont,
and ENT to actvate the drect-to functon.
Selecting the Nearest Airport as a Direct-To
Destination
The select direct-to waypoint page always displays
the nearest airports (from your present position) on
the NRST field. Navigating directly to a nearby airport
is always just a few simple steps away. (Nearby airports
may also be selected as direct-to destinations using the
steps described Section 7 - NRST Pages - Navigating to
a Nearby Waypoint.)
To select a nearby airport as a direct-to destina-
tion:
Press the direct-to key. The select drect-to
1.
waypont page wll appear, wth the waypont
dentfier field hghlghted.
Turn the large right knob to hghlght the
2.
nearest arport (NRST) field.
3. Turn the small right knob to dsplay a wndow
showng up to nne nearby arports.
4. Contnue turnng the small right knob to
scroll through the lst and hghlght the desred
arport.
5. Press ENT to confrm the selected arport, and
ENT to actvate the drect-to functon.
NOTE: Performing a direct-to for the MAP of an
active approach will cancel approach mode.
190-00356-00 Rev B
3 - DIRECT-TO
Selecting a Destination
63