Section 6 Wpt - Garmin GPS 400W Pilot's Manual & Reference

6 - WPT PAGES
Identifier, Facility, Location or City
The WPT page group includes ten pages. While
viewing any WPT page, turn the small right knob
to select a different WPT page. The first six pages
provide detailed information for the selected airport:
location, runways, frequencies, approaches, arrivals,
and departures. The last four pages provide informa-
tion for intersections, NDBs, VORs and user-created
waypoints.
After a WPT page is selected, information for a
waypoint may be viewed by entering the identifier (or
name) of the desired waypoint. Airports, NDBs and
VORs may be selected by identifier, facility name or
location (city).
To enter a waypoint identifier:
1. Select the desred WPT page and press the
small right knob to actvate the cursor.
Turn the small right knob to select the first
2.
character of the waypont's dentfier.
3. Turn the large right knob to select the next
character field.
Turn the small right knob to select the desred
4.
character.
5. Repeat steps 3 and 4 untl the dentfier s
selected, then press ENT.
To remove the flashng cursor, press the small
6.
right knob.
114
To enter a waypoint facility name or city location:
1. Select the arport locaton page, NDB page or
VOR page from the WPT page group.
Press the small right knob to actvate the
2.
cursor.
3. Turn the large right knob to select the faclty
name or locaton (cty) field.
Turn the small right knob to select the desred
4.
character.
Turn the large right knob to select the next
5.
character field.
6. Repeat steps 4 and 5 untl the faclty name or
locaton s selected, then press ENT.
To remove the flashng cursor, press the small
7.
right knob.
190-00356-00 Rev B