SunrSe / Sunset - Garmin GPS 400W Pilot's Manual & Reference

5. The flashng cursor moves to "Compute
RAIM?". Press ENT to begn RAIM predcton.
Once calculatons are complete, the 400W-
seres unt wll dsplay one of the followng n
the RAIM status field:
• RAIM Not Available— Satellite coverage is
predicted to NOT be sufficient for reliable
operation during non-precision approaches
• RAIM Available— Satellite coverage is predicted
to be sufficient for reliable operation during
all flight phases, including non-precision
approaches
NOTE: RAIM computations predict satellite cover-
age within ±15 minutes of the specified arrival
date and time. Refer to the CDI/Alarms section
of Aux pages Setup 1 for specific information
regarding RAIM protection limits.
Sunrise / Sunset
To calculate sunrise and sunset times at any
waypoint or your present position:
1. Select "Sunrse / Sunset" from the utlty
page.
2. The flashng cursor hghlghts the waypont
field. Use the small and large right knobs
to enter the dentfier of the waypont at whch
you wsh to determne sunrse and sunset
tmes. Press ENT when finshed. (To determne
sunrse/sunset tmes for your present poston,
press CLR, followed by ENT.)
3. The flashng cursor moves to the date field. Use
the small and large right knobs to enter the
date for whch you wsh to determne sunrse
and sunset tmes.
Press ENT to calculate sunrse and sunset tmes
4.
for the selected locaton and date.
190-00356-00 Rev B
9 - AUX PAGES
Utility Page
163