Garmin GPS 400W Pilot's Manual & Reference page 96

5 - PROCEDURES
Procedure Turn Approach
3. As you approach the IAF (LYH), a waypont alert
("LT TO 205° x S") wll appear n the lower rght
corner of the screen. As the dstance (DIS) to
the IAF approaches zero, the alert s replaced
by a turn advsory ("LT TO 205° NOW"). The
unt wll gude you automatcally, or you can
dal the outbound course of 205° nto the CDI
(or HSI) usng the OBS knob and ntate a
standard rate turn to ths course headng.
4. Fly the outbound course, keepng the CDI
needle centered.
5. Once you have flown approxmately one mnute
past the FAF (LYH), the alert message "LT TO
160° x S" wll appear n the lower rght corner
of the screen. You may ntate the procedure
turn at any tme after recevng ths alert mes-
sage.
86
RW04


6. Turn left to a headng of 160° to ntate the
procedure turn. Course gudance s provded
relatve to the outbound leg from the FAF. (The
procedure turn s dsplayed on the map page
and ndcated as the actve leg on the default
NAV and actve flght plan pages.) The CDI
needle wll start movng to the rght.
7. After approxmately one mnute, make a 180°
rght turn to a headng of 340° to ntercept
the nbound course. The unt wll sequence to
the nbound leg to the FAF, the CDI needle wll
swng to the opposte sde to provde proper
190-00356-00 Rev B

31 nm

DO NOT USE FOR
NAVIGATION