Clearing A Repeater List - Icom IC-80AD Instruction Manual

6
DV MODE PROGRAMMING
r Push [ ](5) to enter the list.
t Push [ ](2) or [ ](8) to select the content to be changed,
then push [ ](5) to enter the content and reprogram the
content (see pages 40–43 for new repeater list program-
ming details).
y After programming is finished, push [ ](2) or [ ](8) to
select "ADD W" or "OVR W," then push [ ](5).
When "ADD W" is selected;
• "ADD W " appears.
OK?
When "OVR W" is selected;
• "OVR W " appears.
OK?
y Push [ ](5) again to store the list.
46

Clearing a repeater list

Contents of programmed list can be cleared (erased).
q Enter "EDIT-L" in RPT-L menu.
MENU RPT-L EDIT-L
(Push [MENU ]), (Push [ ](2)/[ ](8), then push [ ](5).)
• Programmed repeater name appears.
w Push [ ](2) or [ ](8) to select the desired repeater list to
be erased.
• Push and hold [BAND] for 1 sec. to enter group selection, rotate
[DIAL] to select the desired group (0–9) then push [BAND].
e Push [ ](5) to enter the list.
r Push [
](2) or [ ](8) to select "CLEAR," then push
[ ](5).
• "CLEAR " appears.
OK?
t Push [ ](5) again to clear the list.