Pair Control Solenoid Valve - Suzuki DL650 Service Manual

EMISSION C ON T R OL INFORMATION 10-7
PAlR CONTROL SOLENOID VALVE
Remove the air cleaner box. (-5-1 5)
Remove the PAIR control solenoid valve
@ I .
Check that air flows through the air inlet port to the air outlet
port.
If air does not flow out, replace the PAlR control solenoid
valve with a new one.
Connect the 12 V battery to the PAIR control solenoid valve
terminals and check the air flow.
If air does not flow out, the solenoid valve is in normal condi-
tion.
Check the resistance between the terminals of the PAlR con-
trol solenoid valve.
Resistance: 20
-
24 (at 20 OW68 O F )
a
09900-25008: Multi circuit tester set
-
;m
Tester knob indication: Resistance
(a)
If the resistance is not within the standard range, replace the
PAlR control solenoid valve with a new one.
Connect the PAlR control solenoid valve lead wire coupler
securely.
Installation is in the reverse order of removal.