Suzuki DL650 Service Manual page 137

3-86 ENGI N E
GENERATOR ROTOR
Install the starter driven gear
a.
Apply engine oil to the bushing of the starter driven gear.
Degrease the tapered portions
@
of the generator rotor
assembly and the crankshaft. Use nonflammable cleaning
e4
solvent to wipe off oily or greasy matter and make these sur-
faces completely dry.
Fit the key in the key slot on the crankshaft completely.
Install the generator rotor assembly onto the crankshaft.
I
-
.-
a
While holding the generator rotor with the special tool, tighten
its bolt to the specified torque.
a
09930-44530: Rotor holder
Generator rotor bolt: 120 N-m (12.0 kgf-m, 87 Ib-ft)
CAM CHAIN DRIVE SPROCKET
Install the cam chain drive sprocket
0
onto the crankshaft.
NOTE:
*
Align the punched mark
@
on the cam chain drive sprocket
with the punched mark
@9
on the crankshaft.
*
Apply MOLYBDENUM OIL SOLUTION to the cam chain drive
sprocket.
MOLYBDENUM OIL SOLUTION