Suzuki DL650 Service Manual page 139

3-88
E N G I N E
OIL PIPE
Install the oil pipe
@.
Tighten the oil pipe stopper screw
@
to the specified torque.
[L1
Oil pipe stopper screw: 8 N-m (0.8 kgf-m, 6.0 Ib-ft)
NOTE:
Align the projection
@
of the oil pipe with the groove
@
of its
stopper.
GEARSHIFT SYSTEM
Install the gearshift cam stopper
0,
its bolt
@,
washer
@
and
return spring
@.
[ 1 1
Gearshift cam stopper bolt: 10 N-m (1.0 kgf-m, 7.0 Ib-ft)
Confirm the gearshift cam stopper movement.
Check the neutral position.
NOTE:
Hook the return spring end
@
to the stopper.
Install the gearshift cam stopper plate
@
with the gearshift
cam pins
@
inserted into the gearshift cam stopper plate
holes @ I .