Suzuki DL650 Service Manual page 134

E N G I N E 3-83
CRANKSHAFT
Coat lightly MOLYBDENUM OIL SOLUTION to the crankshaft
journal bearings.
MOLYBDENUM OIL SOLUTION
Install the crankshaft into the left crankcase half.
pmmq
Never strike the crankshaft with a plastic hammer
when inserting it into the crankcase. It will be easy to
install the crankshaft t o left crankcase.
-
CRANKCASE
Clean the mating surfaces of the left and right crankcase
halves.
Install the O-rings
@, @
and dowel pins
@.
Apply SUZUKl SUPER GREASE to the O-rings
a,
0.
99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
Apply SUZUKl BOND to the mating surface of the left crank-
case.
a
991 04-31 140: SUZUKI BOND "1 2O7B" (USA)
a
99000-31 110: SUZUKI BOND "1215" (Others)
NOTE:
Use of SUZUKI BOND is as follows:
Make surfaces free from moisture, oil, dust and other foreign
materials.
Spread on surfaces thinly to form an even layer, and assemble
the crankcases within few minutes.
Take extreme care not to apply any SUZUKl BOND to the oil
hole, oil groove and bearing.
Apply to distorted surfaces as it forms a comparatively thick
. -
film.