Generator And Signal Generator - Suzuki DL650 Service Manual

Hide thumbs Also See for DL650:
Table of Contents

Advertisement

3-80
ENGINE
Be sure to seat the flange
@
of the one way clutch
@
to the
guide
@.
Install the guide
@
to the generator rotor with the arrow mark
faced upward.
Apply THREAD LOCK SUPER to the bolts and tighten them
to the specified torque.
4
99000-32030: THREAD LOCK SUPER "1 303"
Starter clutch bolt: 25 N.m (2.5 kgf-m, 18.0 Ib-ft)
Apply engine oil to the one way clutch.
GENERATOR AND SIGNAL GENERATOR
INSPECTION
Refer to pages 8-10, 27 for generator and CKP sensor inspec-
tion.
REASSEMBLY
When installing the generator starter set bolts
@
and the CKP
sensor set bolts
@
tighten them to the specified torque.
Generator stator set bolt: 11 N-m (1.1 kgf-m, 8.0 Ib-ft)
CKP sensor set bolt: 6.5 N.m (0.65 kgf-m, 4.7 Ib-ft)
NOTE:
Be sure to install the grommet
@
to the generator cover.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2004 dl650k4Dl 650 2004

Table of Contents