Cautions In Servicing; Connector; Fuse - Suzuki DL650 Service Manual

8-2 ELECTRICAL SYSTEM
CAUTIONS IN SERVICING
CONNECTOR
When connecting a connector, be sure to push it in until a
click is felt.
lnspect the connector for corrosion, contamination and break-
age in its cover.
COUPLER
With a lock type coupler, be sure to release the lock before
disconnecting it and push it in fully till the lock works when
connecting it.
When disconnecting the coupler, be sure to hold the coupler
itself and do not pull the lead wires.
lnspect each terminal on the coupler for being loose or bent.
lnspect each terminal for corrosion and contamination.
CLAMP
Clamp the wire harness at such positions as indicated in
"WIRE HARNESS ROUTING".
( W 9 - 1 6
to 9-1 8)
Bend the clamp properly so that the wire harness is clamped
securely.
In clamping the wire harness, use care not to allow it to hang
down.
Do not use wire or any other substitute for the band type
clamp.
FUSE
When a fuse blows, always investigate the cause, correct it
and then replace the fuse.
Do not use a fuse of a different capacity.
Do not use wire or any other substitute for the fuse.
CORRECT INCORRECT