Suzuki DL650 Service Manual page 361

8-4
ELECTRICAL SYSTEM
USING THE MULTl CIRCUIT TESTER
Properly use the multi circuit tester
@
and
@
probes.
Improper use can cause damage to the motorcycle and
tester.
If the voltage and current values are not known, begin mea-
suring in the highest range.
When measuring the resistance, make sure that no voltage is
applied. If voltage is applied, the tester will be damaged.
After using the tester, be sure to turn the switch to the OFF
position.
I
CAUTION
I
Before using the multi circuit tester, read its instruction
manual.