Suzuki DL650 Service Manual page 209

FI SYSTEM DIAGNOSIS 4-49
SENSORS
CKP SENSOR INSPECTION
The crankshaft position sensor is installed in the generator
cover. (-4-23)
CKP SENSOR REMOVAL AND INSTALLA-
TION
Remove the generator cover. (-3-26)
Install the generator cover in the reverse order of removal.
-
IAP SENSOR INSPECTION
The intake air pressure sensor is installed at the rear side of the
air cleaner box. ( W 4 - 2 5 )
IAP SENSOR REMOVAL AND INSTALLA-
TION
Lift and support the fuel tank. ( W 5 - 7 )
Remove the IAP sensor from the air cleaner box.
Install the IAP sensor in the reverse order of removal.
TP SENSOR INSPECTION
The throttle position sensor is installed at the left side of the
No.2 throttle body. (-4-28)
TP SENSOR REMOVAL AND INSTALLATION
Remove the air cleaner box. (-5-1
5)
Remove the TP sensor. (-5-1
9)
Install the TP sensor in the reverse order of removal.
rn
TP sensor mounting screw: 3.5 N-m (0.35 kgf-m, 2.5 Ib-ft)
TPS ADJUSTMENT
Adjust the TP sensor. ( W 4 - 1 6 )
ECT SENSOR INSPECTION
The ECT sensor is installed on the thermostat case. ( W 4 - 3 1 )
ECT SENSOR REMOVAL AND INSTALLA-
TION
Remove the ECT sensor. ( W 6 - 1 0 )
Install the ECT sensor in the reverse order of removal.
ECT sensor: 19 N-m (1.9 kgf-m, 13.5 Ib-ft)