Suzuki DL650 Service Manual page 327

7-56 CHASSIS
REMOUNTING
Remount the swingarm in the reverse order of disassembly and
removal. Pay attention to the following points:
SWINGARM
Insert the swingarm pivot shaft and tighten it to the specified
torque with the special tool.
rn
Swingarm pivot shaft: 15 N-m (1.5 kgf-m, 11 .O Ib-ft)
a
09944-28320: Hexagon bit 19 mm
Hold the swingarm pivot shaft
@ I
with the special tool and
tighten the swingarm pivot nut
a
to the specified torque.
@
09944-28320: Hexagon bit 19 mm
rn
Swingarm pivot nut: 100 N-m (10.0 kgf-m, 72.5 Ib-ft)
Tighten the swingarm pivot lock-nut to the specified torque
with the special tool.
@
09940-14940: Swingarm pivot thrust adjuster socket
wrench
rn
Swingarm pivot lock-nut: 90 N-m (9.0 kgf-m, 65.0 Ib-ft)