Suzuki DL650 Service Manual page 72

E N G I N E
3-21
Remove the rear cylinder head cover
@.
Remove the dowel pin
@
and O-ring
@.
FRONT CAMSHAFTS
Turn the crankshaft to bring the
"
1
F line
@
on generator rotor
to the index mark
@
of the valve inspection hole and also to
bring the cams to the position as shown in illustration.
NOTE:
At the above condition, the front cylinder is at TDC of com-
pression stroke.
Before removing the camshafts, inspect the valve clearance.
( W
2-8)
Remove the cam chain guide
@.