Drive Chain; Drive Chain Cutting - Suzuki DL650 Service Manual

CHASSIS 7-83
DRIVE CHAIN
Use the special tool in the following procedures, to cut and rejoin
the drive chain.
@
09922-2271 1: Drive chain cutting and joining tool set
NOTE:
When using the special tool, apply a small quantity of grease to
the threaded parts of the special tool.
DRIVE CHAIN CUTTING
Set up the special tool as shown in the illustration.
@
Tool body
@
Grip handle
@
Pressure bolt " A
@
Pressure bolt "B"
@
Bar
@
Adjuster bolt (with through hole)
Pin remover
@
Chain holder (engraved mark 500)
with reamer bolt M5 x 10
NOTE:
The tip of pin remover should be positioned inside
@
approx-
imately 5 mm (0.2 in) from the end face of pressure bolt "A"
@ I
as shown in the illustration.