Suzuki DL650 Service Manual page 234

5-24 FUEL SYSTEM AND THROTTLE BODY
Install the spring
@
and fast idle link lever
@.
NOTE:
Make sure that the spring ends are hooked correctly.
Install the washers
@, @,
spring washer and nut
@.
NOTE:
The washer
@
is inserting
in
the axis certainly.
Apply SUZUKI SUPER GREASE to the seal lips.
99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
Install the seal
@.
Apply a small quantity of SUZUKI SUPER GREASE to the
shaft ends and seal lips.
99000-25030: SUZUKl SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
a
Turn the TP sensor counterclockwise and install the mounting
screws.
Tighten the TP sensor mounting screws.
09930-1 1950: Torx wrench
TP sensor mounting screw: 3.5 N.m (0.35 kgf-m, 2.5 Ib-ft)