Suzuki DL650 Service Manual page 239

FUEL SYSTEM AND THROTTLE BODY 5-29
TP SENSOR ADJUSTMENT
After checking or adjusting the throttle valve synchronization,
adjust the TP sensor positioning as follows:
After warming up engine, adjust the idling speed to 1 300 rpm.
Stop the warmed-up engine and connect the special tool to
the dealer mode coupler. ( W 5 - 2 0 )
&
09930-82720: Mode select switch
If the TP sensor adjustment is necessary, loosen the TP sen-
sor mounting screws.
Turn the TP sensor and bring the line to middle.
Tighten the TP sensor mounting screws.
09930-1 1950: Torx wrench
TP sensor mounting screw: 3.5 N.m (0.35 kgf-m, 2.5 Ib-ft)
@
Incorrect
@
Correct position