3-26 ENGI N E
REAR PISTON
Place a clean rag over the cylinder base so as not to drop the
piston pin circlip into the crankcase.
Remove the piston pin circlip
0.
Remove the piston (3 by driving out the piston pin.
NOTE:
Scribe the cylinder number on the head of the piston.
STARTER MOTOR
Wv
Remove the starter motor mounting bolts and the clamp
0. .
- ,
-
Remove the starter motor (3.
ENGINE BOTTOM SIDE
OIL FILTER
Remove the oil filter
@
with the special tool.
09915-40610: Oil filter wrench
GENERATOR COVER
Remove the generator cover
@.
Remove the gasket
and dowel pins
@.
Remove the starter idle gear
@
and its shaft
6).