Loading The Labels - SATO HT200e Operator's Manual

SECTION 2: INSTALLATION AND SETUP

LOADING THE LABELS

This printer will produce labels in two modes: "continuous or dispense"
• For continuous follow steps 1 to 7.
• For dispense follow steps 8 to 13.
1.
Press the cover open lever on the right side of the printer.
2.
Open the top cover by pulling it upward.
3.
Place paper on the reel holder.
4.
Set paper to the paper holder. The paper must be set with
the printed side facing upward.
Page 2-10
Reel Holder Paper
Top cover
Paper holder
SATO HT200e