SATO HT200e Operator's Manual page 11

SAFETY PRECAUTIONS
Thermal Head:
-
-
-
Opening and Closing of Thermal Head:
-
Paper Setting:
-
-
When Not in Use for A Long Period:
-
When Cleaning:
-
ATTENTION: PC CARD
• A used standard lithium cell (non-chargeable) shall be taken insulating measure, such
as sealing with tape on both porlarities (plus and minus), and contact disposal contrac-
tor for industrial wastes.
BATTERY PACK
• To save resource for effective use, a used battery pack shall be taken insulating mea-
sure, such as sealing with tape on contact surfaces, and contact our sales representa-
tive or service staff for its disposal.
• DO NOT MIX BATTERY PACK WITH OTHER CELLS.
SATO HT200e
BE CAREFUL
head. This is because thermal head after prin ing becomes elevated
temperatures.
BE CAREFUL if touching the edge of thermal head by naked hands
when changing paper or cleaning the head--some kind of injury may
occur.
DO NOT CHANGE thermal head by your routine. This may cause injury,
burn, or electric shock.
BE CAREFUL not to include any foreign materials other than paper
when opening and closing the head. This may cause you hurt or dam-
age to it.
BE CAREFUL, when setting paper, not to put your finger on between
paper and paper feeding portion.
BE CAREFUL not to hurt when disengaging the cover of paper feeding
opening.
PULL power code OUT from the outlet for your safety when not in use.
PULL power code OUT from the outlet for your safety when cleaning
printer.
Warning
t
VII