SATO HT200e Operator's Manual page 68

FIELD SETTING FOR TABLE DATA
Based on the field destination, the setting, in which "11: Table Data" is specified, is described.
Digit Designated item
Position(s)
1, 2 Field designation 11: Table Data
3 Font selection
4, 5, 6 Vertical position
7, 8, 9 Horizontal
position
10 Rotation position
(Note 1)
11 Character pitch
(Note 2)
Character count
12
，
13
14 Vertical
expansion
15 Horizontal
expansion
I nput Check Digits
16 Input check
17 Set of title
18 Set of table
number
19 0 insertion
20 Preset
21 Color of font
Note 1: For the position of rotation, see 1. in Additional Information for Parameter.
Note 2: When lateral direction is enlarged, space between characters will increase.
SATO HT200e
0: X1 (20 x 50 dots)
1: X2 ( 8 x 20 dots)
2: X3 (13 x 21 dots)
4: OCR-B (20 x 24 dots)
001 to 784 dot (s): Vertical print position
000: Entry only, where print is not required.
001 to 384 dot (s): Horizontal print position
0: 0° 2: 180°
1: 90° 3: 270°
0 to 9 dot (s)
01 to 32: Number of characters in the field
1 to 4: Magnification of vertical direction to character
1 to 4 :Magnification of horizontal direction to character
0: No check
2: Must enter
0: Not display as a title in printing preset
1: Initially display as a title in printing preset
(For a format, one field set only.)
1: Table 1 data 3 : Table 3 data
2: Table 2 data
0: No 0 insertion
1: 0 insertion in right-aligned when copy is required.
(i.e. 1 = 001)
0: No entry in printing preset (Not displayed)
1: Entry in printing preset (Displayed)
0: Black 4 : Black-and-white reversal
3: Red
SECTION 4
Description
FREE MODE
：
Page 4-5