SATO HT200e Operator's Manual page 55

SCREEN FOR CONSUMPTION TAX RATE SETTING
［ Ｖ Ａ Ｔ １ ５ ． ０ ０ ％ ]
1 ￡ ・ ・ ・ ・ ・ ・
Ｖ Ａ Ｔ
2 ［ １ ７ ． ５ ５ ］ ％
［ Ｖ Ａ Ｔ １ ７ ． ５ ５ ％ ]
3 ￡ ・ ・ ・ ・ ・ ・
Note 1) Consumption tax rate is a prerequisite, so that 0% can not be allowed.
Note 2) Where asterisk mark or "*" can be seen in the upper right on the screen, entry by scanner can be made
possible.
Note 3) Fractions should be omitted.
SWITCHING TO ENGLISH CURRENCY
［ Ｐ Ｒ Ｉ Ｃ Ｅ
1 ￡ ・ ・ ・ ・ ・ ・
Ｃ Ｕ Ｒ Ｒ Ｅ Ｎ Ｃ Ｙ Ｃ Ｈ Ａ Ｎ Ｇ Ｅ
2 Ｐ Ｏ Ｕ Ｎ Ｄ
1. Default option: As referred to [5-6] on the Process on the Screen for Currency Mark Setting, where default
option is selected, the mark will be represented in English currency.
2. Pound and pence: If, in the process No. 1, [SHFT] is pressed, it will not be changed to the presentation of
pence on the screen.
Currency Mark Print style
Pound
￡
Pence 150ð
Where Pound is specified, decimal point will be put in the space between 2 and 3 digits from the last position in
the price entered.
If the numbers entered are less than 3 digits, "0." will be added.
SATO HT200e
］
Ｐ Ｅ Ｎ Ｃ Ｅ
How to change:
Select default currency, so that it will be changed to pound.
1 .50
Select default currency, so that it will be changed to pence.
SECTION 2: INSTALLATION AND SETUP
*
Press [FNC2], so that it goes to the screen for the
consumption tax rate.
Where the tax rate is changed, re-enter 4 digits
ranging from 0 to 9. Note that entry is a prerequisite.
Press [ENTR], so that it goes back to the entry screen
for PRICE.
Press [AC], so that it clears the date entered.
*
Note: Where no rate is set, the process No. 2 will
automatically be displayed before the No. 1.
On the PRICE entry screen in the default option 1
(See below.) for currency mark, press [FNC1].
(To use a price data)
Select pound and pence 2 (See below.) with [
[ ].
→
Press [ENTR], so that it goes back to the process
No. 1.
( Format 23.24)
Page 2-37
] and
←