SATO HT200e Operator's Manual page 10

SAFETY PRECAUTIONS
DO NOT PLACE the printer at high humidity and condensation:
When the printer is affected by condensation, immediately turn it OFF. Leave the
printer until it DRIES again. Note that the continuous use of the printer with the
condensation may cause electric shock.
How to Carry:
-
-
Power Supply:
-
-
Power Code:
-
-
Cover:
-
VI
When moving the printer, BE SURE TO PLUG OFF and ENSURE TO
CUT THE CONNECTION LINE OFF externally. If it remains connected,
the cord and/or the line may damage, causing a fire or electric shock.
DO NOT CARRY the printer with paper set. If it is carried with paper, the
supplys may be dropped, causing unexpected hurt or damage.
DO NOT TOUCH the power cord with wet hand. It
may cause electric shock.
BE CAREFUL when the power unit is heated.
PLUG should BE AWAY FROM thermal appliance. If the appliance is
placed adjacent to it, the coating of plug may melt, causing a fire or elec-
tric shock.
BE SURE TO HOLD the PLUG when pulling the code out from the out-
let. If the code is pulled ,
fire or electric shock.
Be Careful not to put your finger between the printer cover and the
base. Secure the cover properly to avoid accidents.
Warning
exposure of core wire or break may cause
SATO HT200e