Loading Labels - SATO M5900RV Operation Manual

Operation Manual
5.

Loading Labels

1. Open the print head assembly by pulling the head latch toward
the front of the printer. The print head assembly is spring-loaded
and will automatically open as soon as the head latch is disen-
gaged.
2. Push the label unwind guides to the outside of the printer to give
the maximum label width.
3. Load the media roll onto the label unwind bracket so that the
printing side of the labels faces upwards as it unwinds from the
roll. Push the roll all the way to the inside of the printer and the
label unwind guide snugly against the outside of the label roll.
M5900RV
5. Media Loading
Head Latch
Label Unwind
Bracket
Label Guides
Label Guide
43