SATO HT200e Operator's Manual page 102

SECTION 5 PRESET, TABLE DATA
：
TABLE DATA
Ｆ Ｏ Ｒ Ｍ Ａ Ｔ Ｎ ｏ
1 ［ ・ ・ ］
Ｔ Ａ Ｂ Ｌ Ｅ Ｓ Ｔ Ｏ Ｒ Ｉ Ｎ Ｇ
2 Ｔ Ａ Ｂ Ｌ Ｅ １
Ｔ Ａ Ｂ Ｌ Ｅ ３
Ｔ Ａ Ｂ Ｌ Ｅ Ｓ Ｔ Ｏ Ｒ Ｉ Ｎ Ｇ
3 Ｔ Ａ Ｂ Ｌ Ｅ １
Ｔ Ａ Ｂ Ｌ Ｅ ３
Ｔ Ａ Ｂ Ｌ Ｅ Ｓ Ｔ Ｏ Ｒ Ｉ Ｎ Ｇ
4 Ｔ Ａ Ｂ Ｌ Ｅ １ Ｔ Ａ Ｂ Ｌ Ｅ ２
Ｔ Ａ Ｂ Ｌ Ｅ ３
Note: The largest number of table data registration will be: Table 1; 200 (1 to 200), Table 2; 200 (1
to 200), and Table 3; 500 (1 to 500)
Page 5-10
Ｈ Ｔ ２ ０ ０ ｅ
[FNC1]
Ｔ Ａ Ｂ Ｌ Ｅ ２
[ ]
→
Ｔ Ａ Ｂ Ｌ Ｅ ２
[ ] [ ]
← ↓
[ ]
↑
Press [FNC1], so that it goes from the modes of
the print of format to the table data.
The screen for the selection of data registration
area 1 will be displayed: Press [
to the screen for the process No. 3. Whereas
[ENTR] is pressed, it goes to the selection for table
data registration.
The screen for the selection of data registration
area 2 will be displayed: Use [
it goes to the screen for the process No. 4.
Whereas [ENTR] is pressed, it goes to the selec-
tion for table data registration.
The screen for the selection of data registration
area 3 will be displayed: Press [
to the screen for the process No. 2. Whereas
[ENTR] is pressed, it goes to the selection for table
data registration.
] , so that it goes
→
] and [ ] , so that
← ↓
], so that it goes
↑
SATO HT200e