SATO HT200e Operator's Manual page 29

5.
Pass paper through the paper guide.
6.
Close the paper guide according to paper size.
When in continuous mode
7.
Protrude the paper tip 5 to 6 cm from the main unit and
close the top cover.
*Close it firmly until you hear it click.
When in dispense mode
8.
Make sure that you have already followed steps 1 to 5.
9
Peel 5 or 6 labels off the backing paper.
10.
Push up the dispense frame on the front of the main unit and open it.
SATO HT200e
SECTION 2: INSTALLATION AND SETUP
Paper guide
Page 2-11