Print History; Print For History - SATO HT200e Operator's Manual

SECTION 7: OTHERS

PRINT FOR HISTORY

Ｆ Ｏ Ｒ Ｍ Ａ Ｔ Ｎ ｏ
1 ［ ・ ・ ］
Ｈ Ｉ Ｓ Ｔ Ｏ Ｒ Ｙ Ｐ Ｒ Ｉ Ｎ Ｔ Ｏ Ｋ
2
Ｐ Ｒ Ｉ Ｎ Ｔ Ｉ Ｎ Ｇ
3
IMPORTANT: The print for history will be applied only to No. 17, 18, and 19 in the print format for
markdown label. History up to 50 can be stored as data history for the print of markdown format.
Where power is "OFF", data will be cleared.
The print will be arranged as follows:
Assumption: Date that history was printed will be printed in the first line at the top and one data
with 2 lines will be printed for 5 data:
［ ２ ８ ０ ７ ９ ８ １ ９
:
Ｆ Ｎ Ｏ １ ７ □ □ □ Ｂ Ａ Ｒ Ｃ Ｏ Ｄ Ｅ
:
Ｗ Ａ Ｓ １ ２ ５ ． ０ ０ □ Ｎ Ｏ Ｗ
[280798 19:28]
FNO:17 BARCODE:5012345678900
WAS:125.00 NOW:100.00 QTY:0010
FNO:18 BARCODE:1234567890128
WAS: 19.99 NOW: 10.00 QTY:0005
.
.
FNO:17 BARCODE:5012345678900
WAS:125.00 NOW:100.00 QTY:0010
Page 7-2
Ｈ Ｔ ２ ０ ０ ｅ
Ｙ ／
:
２ ８ ］
:
５ ０ １ ２ ３ ４ ５ ６ ７ ８ ９ ０ ０
:
１ ０ ０ ． ０ ０ □ Ｑ Ｔ Ｙ
Press [ . ], so that it goes to the mode of history
print.
Use [ ] and [
← →
Ｎ
[ENTR], so that it prints history.
When print is complete, it goes back to the process
No. 1.
:
０ ０ １ ０
For one label, 5 sets of data will be printed.
Ten sheets of paper, up to 50 histories, will be printed.
Note: P51mm x W48mm label will only be available.
] to select the history print. Press
SATO HT200e