SATO HT200e Operator's Manual page 108

STRUCTURE FOR COMMAND
1.
Basic configuration
When command is sent to a printer, it consists of header, format No., field data, and trailer, all of
which are designated in order:
･ ･ ･ ･ ･
Header STX
･ ･
Format No. Format No. and data regulating print position (format and label names)
･ ･ ･
Field Field No., item name, parameter, and fixed data
･
･ ･ ･ ･ ･
Trailer <Z>
Important: Some error can not be displayed up to 500 times (the number of receiving error)
because there is occasion that uncontrollable signal can be received when opening and closing
the line at a host.
SATO HT200e
･
<A>
･
･
･
･
ETX
SECTION 6: ON LINE
Page 6-3