SATO HT200e Operator's Manual page 76

FREE MODE
Free mode allows free set for print layout, character, and bar code so as to print them on the
label. Setting the layout, the types of character and bar code, and the entry method is called "field
parameter" and the registration mode can be used to preset them.
The function also includes issuance of sequential number and addition of date and time.
MEMORY
YES/NO
If "NO"
PASSWORD
[
･ ･ ･
FORMAT
[
･ ･
PARAMETER
SETTING
PARAMETER
SET LABEL
When the print parameter is registered:
FORMAT
[
･ ･
[
･ ･ ･ ･ ･ ･ ･ ･ ･ ･
Entry procedure is specified by following a parameter.
Comment 1 When power is "ON", a screen for the entry of format number will be displayed.
SATO HT200e
AC + Power "ON"
Comment 1 (See below.)
C LEAR
？
If "YES"
]
N o.
]
HT200e
SETTING M ODE
ENTR
M ODE
S IZE
N o.
] [ ]
･ ･ ･ ･ ･ ･ ･ ･ ･ ･
]
"310"
Enter password in 3 digits and press ENTR.
Enter password rightly and implement memory clear,
so that data on the parameter and preset in a printer
can be eliminated.
Note 1:To use data already registered, data backup
must be required.
Note 2:If wrong password is entered, it returns to the
previous screen.
To enter the registration mode for parameter, key 1)
SHFT and 2) SET in.
Select parameter or paper setting, and then press
ENTR, from which various processes can be handled.
Enter whatever the format number is appropriate.
Then press ENTR.
SECTION 4 FREE MODE
：
Page 4-13