SATO HT200e Operator's Manual page 71

SECTION 4 FREE MODE
：
FIELD SETTING FOR CALENDAR
Based on the field designation, the setting, in which "30/31: Calendar" is specified, is described.
Digit Designated
position (s)
1, 2 Field
designation
3 Font selection
4, 5, 6 Vertical
position
7, 8, 9 Horizontal
position
Rotation position
10
(Note 1)
11 Character pitch
(Note 2)
12, 13 Character
count
14 Vertical
expansion
15 Horizontal
expansion
I nput Check Digits
16 Input check
17 Addition
18 Selection for
presentation
19 Separator
(Note 4)
20 Preset
21 Reserved
Note 1: For the position of rotation, see 1. in Additional Information for Parameter.
Note 2: When horizontal direction is enlarged, space between characters will increase.
Note 3: Where the addition for time and date is specified for the identical format, carried-over time will be reflected to
the date.
Note 4: Separator does not involve in time.
Page 4-8
item
30: Calendar/Date
31: Calendar/Time
1: X2 (
2: X3 ( 13 x 21 dots)
001 to 784 dot (s): Vertical print position
000: Entry only, where print is not required.
001 to 384: Horizontal print position
0: 0°
1: 90°
0 to 9 dot (s)
01 to 10: Number of characters in the field
1 to 4: Magnification of vertical direction to character
1 to 4: Magnification of horizontal direction to character
6: Numeric in all digits
7: Numeric is accepted, but neither 0 nor un-entry is allowed.
0: No addition
Note that date and time should be arranged separately in each
field per format.
For Date filed;
1: mmddyy
2: yymmdd
0: ddmmyy
For time filed;
0: 5:30
1: AM 5:30
2: 5:30 AM
0: None
0: No entry in printing preset (Not displayed)
1: Entry in printing preset (Displayed)
0: Determined
Description
8 x 20 dots)
2: 180°
3: 270°
1 : Addition
3: ddmmyyyy
4: mmddyyyy
5: yyyymmdd
23:05 (Addressed in 24-hour system)
PM 11:05 (AM and PM are affixed.)
11:05 PM (AM and PM are suffixed.)
1 :/ 2 : - 3 :
．
SATO HT200e