SATO HT200e Operator's Manual page 45

PROCESS ON THE SCREEN FOR CURRENCY MARK SETTING
6 + Power "ON"
Ｐ Ａ Ｒ Ａ Ｍ Ｅ Ｔ Ｅ Ｒ Ｃ Ｏ Ｐ Ｙ
1 Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ ← → Ｃ Ａ Ｒ Ｄ
[ ]
←
Ｄ Ａ Ｔ Ａ Ｓ Ｔ Ｏ Ｒ Ｅ ／ Ｒ Ｃ Ａ Ｌ Ｌ
2 Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ ← → Ｈ Ｏ Ｓ Ｔ
[ ]
←
Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ Ｓ Ｔ Ｒ ／ Ｒ Ｃ Ａ Ｌ Ｌ
3 Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ ← → Ｈ Ｏ Ｓ Ｔ
[ ]
←
Ｆ Ｏ Ｎ Ｔ Ｓ Ｔ Ｏ Ｒ Ｅ ／ Ｒ Ｃ Ａ Ｌ Ｌ
4 Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ ← → Ｈ Ｏ Ｓ Ｔ
[ ]
←
Ｔ Ａ Ｂ Ｌ Ｅ Ｓ Ｔ Ｒ ／ Ｒ Ｃ Ａ Ｌ Ｌ
5 Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ ← → Ｈ Ｏ Ｓ Ｔ
[ ]
←
Ｃ Ｕ Ｒ Ｒ Ｅ Ｎ Ｃ Ｙ Ｓ Ｅ Ｌ Ｅ Ｃ Ｔ
6
Ｃ Ｕ Ｒ Ｒ Ｅ Ｎ Ｃ Ｙ Ｓ Ｅ Ｌ Ｅ Ｃ Ｔ
Ｄ Ｅ Ｆ Ａ Ｕ Ｌ Ｔ
Ｃ Ｕ Ｒ Ｒ Ｅ Ｎ Ｃ Ｙ Ｃ Ｒ １
Ｈ Ｏ Ｌ Ｌ Ａ Ｎ Ｄ
SATO HT200e
[ ]
→
[ ]
→
[ ]
→
[ ]
→
[ ]
→
Ｕ Ｓ Ｅ Ｒ
［ ｆ ]
SECTION 2: INSTALLATION AND SETUP
Press [ENTR], so that it goes to the screen for the
selection of copying print parameter.
Press [ ], so that it goes to the process No. 2.
→
Press [ENTR], so that it goes to the screen for the
selection of transferring print parameter.
Press [ ], so that it returns to the process No. 1.
←
Press [ ], so that it goes to the process No. 3.
→
Press [ENTR], so that it goes to the screen for the
selection of transfering preset.
Press [ ], so that it returns to the process No. 2.
←
Press [ ], so that it goes to the process No. 4.
→
Press [ENTR], so that it goes to the screen for the
selection of transfering font.
Press [ ], so that it returns to the process No. 3.
←
Press [ ], so that it goes to the process No. 5.
→
Press [ENTR], so that it goes to the screen for the
selection of table data.
Press [ ], so that it returns to the process No.4.
←
Press [ ], so that it goes to the process No. 6.
→
Press [ENTR], so that it goes to the screen for the
selection of currency mark.
Press [ ], so that it returns to the process No. 5.
←
Select DEFAULT with [
←
and press [ENTR]: Where DEFAULT is selected,
Pound mark appears, from which it goes to the
screen for the card clear. While USER is selected, it
goes to the process No. 6.
Move with [ ] and [ ] to select currency mark, and
← →
press [ENTR]. This permits to set the currency and
move to the screen for the card clear.
] and [ ] or choose USER,
→
Page 2-27