SATO HT200e Operator's Manual page 103

REGISTRATION FOR TABLE DATA
Ｆ Ｏ Ｒ Ｍ Ａ Ｔ Ｎ ｏ
1 ［ ・ ・ ］
Ｔ Ａ Ｂ Ｌ Ｅ Ｓ Ｔ Ｏ Ｒ Ｉ Ｎ Ｇ
2 Ｔ Ａ Ｂ Ｌ Ｅ １
Ｔ Ａ Ｂ Ｌ Ｅ ３
Ｔ Ａ Ｂ Ｌ Ｅ １
3 Ｓ Ｔ Ｒ
Ｓ Ｔ Ｒ Ｔ Ａ Ｂ Ｌ Ｅ Ｎ ｏ
4 ［ ・ ・ ・ ］
Ｃ Ｏ Ｐ Ｙ Ｆ Ｒ Ｏ Ｍ ［ ・ ・ ・ ］
［ Ｔ Ａ Ｂ Ｌ Ｅ １ ］
5 ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・
・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・
SATO HT200e
Ｈ Ｔ ２ ０ ０ ｅ
[FNC1]
Ｔ Ａ Ｂ Ｌ Ｅ ２
[ENTR]
Ｍ Ｏ Ｄ Ｉ Ｆ Ｙ
[ENTR]
[ENTR]
[ENTR]
SECTION 5
Press [FNC1], so that it goes from the modes of
the print of format to the table data.
The screen for the selection of table data registra-
tion will be displayed: Press [ENTR], so that it
goes to the entry of table number.
The screen for the selection of data registration
area will be displayed: Press [ENTR], so that it
goes to the selection for table data registration.
Ｄ Ｅ Ｌ
Table No. can be entered: Press [ENTR], so that it
goes to the entry of table data. Whereas [SHFT]
or [ ] is pressed, it goes to the entry of number
↓
for the copy table, which displays the table data
already registered when entry is required.
Table data can be entered: Enter table data, and
press [ENTR], so that one table data will be regis-
tered. Note that since the table No. will automati-
cally be counted and returned to the entry of table
number, be sure to repeatedly enter when continu-
ous input is required.
PRESET, TABLE DATA
：
Page 5-11