SATO HT200e Operator's Manual page 105

DELETION FOR TABLE DATA
Ｆ Ｏ Ｒ Ｍ Ａ Ｔ Ｎ ｏ
1 ［ ・ ・ ］
Ｔ Ａ Ｂ Ｌ Ｅ Ｓ Ｔ Ｏ Ｒ Ｉ Ｎ Ｇ
2 Ｔ Ａ Ｂ Ｌ Ｅ １
Ｔ Ａ Ｂ Ｌ Ｅ ３
Ｔ Ａ Ｂ Ｌ Ｅ １
3 Ｓ Ｔ Ｒ Ｍ Ｏ Ｄ Ｉ Ｆ Ｙ
Ｔ Ａ Ｂ Ｌ Ｅ １
4 Ｓ Ｔ Ｒ Ｍ Ｏ Ｄ Ｉ Ｆ Ｙ
Ｔ Ａ Ｂ Ｌ Ｅ １
5 Ｓ Ｔ Ｒ Ｍ Ｏ Ｄ Ｉ Ｆ Ｙ
Ｄ Ｅ Ｌ Ｔ Ａ Ｂ Ｌ Ｅ Ｎ ｏ
6 ［ ・ ・ ・ ］
Ｔ Ａ Ｂ Ｌ Ｅ Ｄ Ａ Ｔ Ａ Ｄ Ｅ Ｌ
7 Ｙ Ｅ Ｓ Ｎ Ｏ
Ｙ ｅ ｌ ｌ ｏ ｗ
SATO HT200e
Ｈ Ｔ ２ ０ ０ ｅ
[FNC1]
Ｔ Ａ Ｂ Ｌ Ｅ ２
[ ]
→
Ｄ Ｅ Ｌ
[ ]
→
Ｄ Ｅ Ｌ
[ ]
→
Ｄ Ｅ Ｌ
[ENTR]
[ENTR]
[ENTR]
SECTION 5
：
Press [FNC1], so that it goes from the modes of the
print of format to the table data.
The screen for the selection of data registration
area will be displayed, in which the selection
screen for the preset print will appear: Press [
so that it goes to the screen for the process No. 3.
The screen for the selection of table data registra-
tion will be displayed: Press [
the screen for the process No. 4.
The screen for the selection of table data modifica-
tion will be displayed: Press [
the screen for the process No. 5.
The screen for the selection of table data deletion
willbe displayed: Press [ENTR], so that it goes to
the screen for the process No. 6.
Table No. can be entered: Press [ENTR], so that it
goes to the confirmation of table data deletion.
Use [ ] and [ ] to select for confirmation. Press
← →
[ENTR], so that it deletes the table data specified:
Pressing [ ] displays table data. Whereas pressing [
↓
and [ ] shows table data for scrolling.
→
PRESET, TABLE DATA
],
→
], so that it goes to
→
], so that it goes to
→
Page 5-13
]
←