SATO HT200e Operator's Manual page 87

SECTION 4 FREE MODE
：
０ １ １ １ : Ｃ Ｈ Ａ Ｒ Ｐ Ｉ Ｔ Ｃ Ｈ
7
２ ０ ２ ０ ２ ５ ０ ３ ２ ０
０ １ １ ２ : Ｃ Ｈ Ａ Ｒ Ｃ Ｏ Ｕ Ｎ Ｔ
8
２ ０ ２ ０ ２ ５ ０ ３ ２ ０ ２
０ １ １ ４ : Ｖ － Ｅ Ｘ Ｐ Ａ Ｎ Ｓ Ｅ
9
２ ０ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８
０ １ １ ５ : Ｈ － Ｅ Ｘ Ｐ Ａ Ｎ Ｓ Ｅ
1 0
２ ０ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １
０ １ １ ６ : Ｉ Ｎ Ｐ Ｕ Ｔ Ｃ Ｈ Ｅ Ｃ Ｋ
1 1 ５ : Ｎ Ｕ Ｍ Ｏ Ｎ Ｌ Ｙ
２ ０ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １ １
０ １ １ ７ : Ｉ Ｎ Ｐ Ｍ Ｅ Ｔ Ｈ Ｏ Ｄ
1 2 ０ : Ｌ Ｅ Ｆ Ｔ
０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ８ : Ｉ Ｎ Ｓ Ｅ Ｒ Ｔ Ｉ Ｏ Ｎ
1 3 ０ : Ｎ Ｏ Ｎ １ : C M ２ : C M ＆ ． ▽
０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ９ : ０ Ａ Ｕ Ｔ Ｏ － Ｉ Ｎ Ｓ
1 4
０ ２ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
:
０ １ ２ ０
15 :
０ Ｏ Ｆ Ｆ ＋ Ｃ Ｍ
０ ２ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ １ : ０ Ｒ Ｅ Ｓ Ｅ Ｒ Ｖ Ｅ Ｄ
1 6
０ ２ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
I t will go to the entry for copy.
Page 4-24
２ ０ ０ ０ ０ ０
０ ０ ０ ０ ０
０
１ : Ｒ Ｉ Ｇ Ｈ Ｔ
Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ ＆ Ｃ Ｍ
Value in one digit can be entered for spacing between
characters: Select the value from "0" to "9".
Value in 2 digits can be entered for the number of
characters: Select the values from "01" to "10".
Value in one digit can be entered for the magnification
of vertical expansion: Select the value from "1" to "4".
０ ０
Value in one digit can be entered for the magnification
of horizontal expansion: Select the value from "1" to "4".
０ ０
Value in one digit can be entered for the input check:
▽
Select the value from "5", "6", and "7".
０
Value in one digit can be entered for the input method:
Select "0" or "1".
Value in one digit can be entered for the presentation
method: Select the value from "0", "1", "2", "5", "6", and
"7".
Value in one digit can be entered for with or without
0 insertion: Select "0" or "1".
Value in one digit can be entered for entering the preset
and switching Euro currency mark: Enter the value from
▽
"0", "1", "8", and "9".
0: No entry, so that general currency mark is not shown.
1: Entry required, so that general currency mark is
shown.
8: No entry, so that Euro currency mark is not shown.
"0" is fixed. Press [ENTR].
SATO HT200e