SATO HT200e Operator's Manual page 72

FIELD SETTING FOR BAR CODE
Based on the field designation, the setting, in which "70/71: Bar Code" is specified, is described.
Digit Designated
position (s)
1, 2 Field designation 70: Human readable information (HRI) is NOT available.
3 Bar code type
4, 5, 6 Vertical position
7, 8, 9 Horizontal
position
10 Rotation position
(Note 1)
11 Character pitch
(Note 3)
12, 13 Character count
14 Bar ratio
15 Bar expansion
I nput Check Digits
16, 17, 18 Bar height
19 Check digit
(Note 4)
20 Preset
21 Reserved
Note 1: For the position of rotation, see 1. in Additional Information for Parameter.
Note 2: The rotation position of 90 and 270° is a hidden mode; the guidance will not be displayed.
Note 3: When horizontal direction is enlarged, space between characters will be increase.
Note 4: When CODE 128 is being set, specify "1".
SATO HT200e
item
71: HRI is available.
0: NW-7
2: INT
２
3: AN13/UPC-A
4: EAN 8
5: UPC
6: CODE 128 (C set)
7: CODE 12 (B set)
001 to 784 dot (s): Vertical print position
000: Entry only, where print is not required.
001 to 384 dot (s): Horizontal print position
0: 0°
1: 90° (Note 2)
0 to 9 dot (s)
Note that if HRI is available, it means spacing between the
characters in it.
01 to 22: Number of digits in the bar code
EAN 8: 08
EAN 13: 13
UPC-A : 12
UPC-E : 07
Note that Start/Stop is not included for NW-7/CODE 39.
0 = Invalid (EAN, UPC-A, and UPC-E)
1 = 1:2
2 = 1:2.5
3 = 1:3
2 to 4: (Ratio 1: 2.5 will be enlarged only to twofold and
fourfold)
001 to 240 dot (s)
0: No C/D
1: C/D creation (Computing
2: C/D check (with input data)
3: Price C/D (Only for EAN 13)
0: No entry in printing preset (Not displayed)
1: Entry in printing preset (Displayed)
0: Determined
Description
1: CODE 39
o f5
E
－
2: 180°
3: 270° (Note 2)
）
SECTION 4 FREE MODE
：
Page 4-9