SATO HT200e Operator's Manual page 91

SECTION 4 FREE MODE
：
０ １ １ １ : Ｃ Ｈ Ａ Ｒ Ｐ Ｉ Ｔ Ｃ Ｈ
7
７ ０ １ ０ ２ ５ ０ ３ ２ ０
０ １ １ ２ : Ｃ Ｈ Ａ Ｒ Ｃ Ｏ Ｕ Ｎ Ｔ
8
７ ０ １ ０ ２ ５ ０ ３ ２ ０ ２
０ １ １ ４ : Ｂ Ａ Ｒ Ｒ Ａ Ｔ Ｉ Ｏ
9 ０ : Ｆ Ｉ Ｘ Ｅ Ｄ １ : １ ― ２
７ ０ １ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８
０ １ １ ５ : Ｂ Ａ Ｒ Ｅ Ｘ Ｐ Ａ Ｎ Ｓ
1 0
７ ０ １ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １
０ １ １ ６ : Ｂ Ａ Ｒ Ｈ Ｅ Ｉ Ｇ Ｈ Ｔ
1 1
７ ０ １ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １ １
０ １ １ ９ : Ｃ Ｈ Ｅ Ｃ Ｋ Ｄ Ｇ Ｔ
1 2 ０ : Ｏ Ｆ Ｆ
８ ５ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ ０ : Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ
1 3 ０ : Ｏ Ｆ Ｆ
８ ５ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ １ : ０ Ｒ Ｅ Ｓ Ｅ Ｒ Ｖ Ｅ Ｄ
1 4
８ ５ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
I t will go to the entry for copy.
Page 4-28
２ ０ ０ ０ ０ ０
０ ０ ０ ０ ０
▽
０ ０ ０
０ ０
０
１ : Ｏ Ｎ ▽
１ : Ｏ Ｎ
Value in one digit can be entered for spacing between
characters in human readable information: Select the
value from "0" to "9".
Value in 2 digits can be entered for the number of
characters: Select the values from "01" to "22".
Value in one digit can be entered for the bar ratio:
Select the value from "0", "1", "2", and "3".
Value in one digit can be entered for the bar ratio:
Select the value from "2", "3", and "4".
Value in 3 digits can be entered for the bar height:
Select the values from "001" to "240".
Value in one digit can be entered for the check digit:
Select the value from "0", "1", "2", and "3".
Value in one digit can be entered for preset:
Select "0" or "1".
"0" is fixed.
SATO HT200e