Show Ip Pimdm Neighbor - Zte ZXR10 8900 Series Command Reference Manual

Syntax
Description
Instructions
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
group <group-addre
ss>
source <source-addr
ess>
summary
If there is no option after this command, all multicast routing ta-
bles are displayed.
If there is the group option after this command, the group (s, g)
routes are displayed.
If there are group and source address options after this command,
the specified (s, g) routes are displayed.
Description of the displayed information is as follows:
Field
Connected
Pruned
Forward
Uptime/Expires
flag
Incoming interface:
RPF nbr
Outgoing interface list
*
show ip mroute

show ip pimdm neighbor

Use this command to show neighbors of the interface on which
PIM-DM is enabled.
All modes
show ip pimdm neighbor [<interface-name>]
<interface-name>
Confidential and Proprietary Information of ZTE CORPORATION
Multicast group address in the dotted decimal
format
Source address in the dotted decimal format
Summary display
Description
Specifies that the multicast group or interface
has directly connected members
Outgoing interface of the route entry is null
Indicates this route has the forwarding
function
Running time and expire time of the
entry/outgoing interface
Multicast routing entry status
Incoming interface of the entry
Corresponding RPF neighbor of the entry
List of the outgoing interfaces
Assert flag
Interface name
Chapter 4 PIM-DM Protocol
41