Show Ip Msdp Peer - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Multicast)
Purpose
Command Modes
Syntax
Syntax
Description
Example
52 Confidential and Proprietary Information of ZTE CORPORATION
Total entries: 32
Description of the displayed information is as follows:
Field
101.1.1.1: 2
Total entries:32

show ip msdp peer

Use this command to display detailed information about the Mul-
ticast Source Discovery Protocol (MSDP) peer.
All modes
show ip msdp peer [<peer-address>]
<peer-address>
The following is sample output of the show ip msdp peer com-
mand.
ZXR10#show ip msdp peer 101.1.1.1
MSDP Peer 101.1.1.1
Description: zte router 1
Connection status:
State: Up, Resets: 9, Connection source: pvc1 (101.1.1.2)
Uptime(Downtime): 1d10h, Messages sent/received: 22189/22236
Connection and counters cleared 1w2d ago
Peer is member of mesh-group zte1
SA Filtering:
Input (S,G) filter: everything
Output (S,G) filter: none
Peer ttl threshold: 0
SAs learned from this peer: 2, SAs limit: 500
Description of the displayed information:
Field
MSDP Peer
State
Connection source
Uptime(Downtime)
Messages
sent/received
Description
MSDP peer with IP address 101.1.1.1: 2 SA
messages from the MSDP peer in the SA
cache
Total number of SA entries in the SA cache:
32
IP address of the MSDP peer
Description
IP address of the MSDP peer
State of the MSDP peer
Interface used to obtain the IP address for
the TCP local connection address
Days and hours the MSDP peer is up or down.
If the time is less than 24 hours, it is shown
in terms of hours : minutes : seconds
Number of SA messages sent to the MSDP
peer/number of SA messages received from
the MSDP peer