Ip Igmp Snooping Query-Response-Interval; Ip Igmp Snooping Mrouter-Backup-En; Ip Igmp Snooping Mrouter-Slave-To-Master - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Multicast)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Related
Commands
Purpose
Command Modes
Syntax
Default
Purpose
66 Confidential and Proprietary Information of ZTE CORPORATION
ip igmp snooping querier

ip igmp snooping query-response-interval

ip igmp snooping
query-response-interval
Use this command to set the maximum query response interval of
the proxy querier. Restore default with the no form of this com-
mand.
Global configuration
ip igmp snooping query-response-interval <interval>
no ip igmp snooping query-response-interval
<interval>
This command takes effect only when the proxy querier is enabled.
ip igmp snooping querier
ip igmp snooping query-interval
ip igmp snooping
mrouter-backup-en
Use this command to enable router interface master/slave func-
tion. Use the no command to disable this function.
Global Configuration Mode

ip igmp snooping mrouter-backup-en

no ip igmp snooping mrouter-backup-en
By default, the function is disabled.
ip igmp snooping
mrouter-slave-to-master
Use this command to enable router interface master/slave
switchover function. Use the no command to disable this function.
Maximum query response interval of the
proxy querier in seconds, range: 1~255,
default: 10 seconds