Mld Snooping Mrouter-Time-Out; Mld Snooping Querier; Mld Snooping Static - Zte ZXR10 8900 Series Command Reference Manual

Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Related
Commands
Purpose
Command Modes
Syntax
Defaults
Instructions
Related
Commands
Purpose
mld snooping mrouter
mld snooping mrouter-time-
out
Use this command to set snooping mrouter-time-out in VLAN.
Route interfaces in static configuration do not age. Cancel the
configuration with the no command.
VLAN configuration
mld snooping mrouter-time-out <time>
no mld snooping max-host-in-group <ip-address>
<time>
mld snooping host-time-out

mld snooping querier

Use this command to set MLD SNOOPING proxy query function.
If there is no multicast router in the network, the proxy multicast
router sends MLD query packets. Cancel the configuration with
the no command.
VLAN configuration

mld snooping querier

no mld snooping querier
Proxy query function is not configured.
If layer-3 multicast route is configured, this command will not take
effect.
ipv6 mld snooping proxy
ipv6 mld snooping querier
ipv6 mld snooping query-interval
ipv6 mld snooping query-response-interval

mld snooping static

Use this command to set MLD SNOOPING proxy query function.
If there is no multicast router in the network, the proxy multicast
Confidential and Proprietary Information of ZTE CORPORATION
Multicast route interface aging time(in
seconds): 30~65535, 260s by default
Chapter 8 MLD SNOOPING
81