Ip Igmp Snooping Mode; Ip Igmp Snooping Packet-Manage - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Multicast)
Defaults
Instructions
Purpose
Command Modes
Syntax
Defaults
Instructions
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Example
64 Confidential and Proprietary Information of ZTE CORPORATION
no ip igmp snooping
The IGMP SNOOPING function is disabled.
To enable global IGMP SNOOPING and to enable MLD SNOOPING
are exclusive. If enabling IGMP SNOOPING in global congfigura-
tion, MLD SNOOPING is forbidden; or if enabling MLD SNOOPING
in global congfiguration, IGMP SNOOPINGis forbidden.

ip igmp snooping mode

Use this command to batchly configure IGMP SNOOPING mode for
a VLAN. There are three modes: proxy, route and transparent .
Global configuration
ip igmp snooping mode {proxy| route | transparent} vlan
<vlan-id>
no igmp snooping mode vlan<vlan-id>
Proxy mode is enabled for a VLAN by default.
This command is supported after the platform version 4.08.20.
This command takes effect only after IGMP SNOOPING is enabled
in global configuration mode.
ip igmp snooping
ip igmp snooping
packet-manage
Use this command to configure the accepting, discarding and ig-
noring functions for IGMP version 1, 2 and 3 packets. Cancel the
setting with the no form of this command.
Global configuration
ip igmp snooping packet-manage {igmpv1 | igmpv2 | igmp
v3}{accept | discard | ignore}
no ip igmp snooping packet-manage {igmpv1 | igmpv2 |
igmpv3}
igmpv1 | igmpv2 |
igmpv3
accept | discard |
ignore
IGMP version 1, 2 and 3 packets are accepted.
1. This example shows how to discard IGMP version 2 packets.
ZXR10(config)#ip igmp snooping packet-manage igmpv2 discard
IGMP version
Operations