Show Ip Mroute - Zte ZXR10 8900 Series Command Reference Manual

Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Field
IIF Wrong
FORWARD

show ip mroute

show ip mroute

Use this command to display the contents of the IP multicast rout-
ing table.
All modes
show ip mroute [group <group-address>][source <source-ad
dress>][brief]
group <group-addre
ss>
source <source-addr
ess>
brief
� If there is no parameter after this command, all multicast route
tables are displayed.
� If there is group option after this command, the group (*, g)
and all related (s, g) route entries are displayed.
� If there are group and source address options after this com-
mand, the specified (s, g) route entries are displayed.
� Description of the displayed information:
Field
Dense
Sparse
Connected
Pruned
RP-bit set
Register flag
Confidential and Proprietary Information of ZTE CORPORATION
Description
Multicast packets are not matched on the
incoming interface
Number of the multicast packets forwarded
on the outgoing interface
Multicast group address in the dotted decimal
format
Source address in the dotted decimal format
Brief display
Description
PIM-DM generated dense route entries
PIM-SM generated sparse route entries
Specifies that the multicast group or
interface has directly-connected members
Outgoing interface of the route entry is null
This (S, g) entry exists on the shared tree
Indicates the entry can send register
messages of the directly connected source
Chapter 3 PIM-SM Protocol
29